 |
Printer Specifications
Mechanical
Printing method:
|
24-pin impact dot matrix
|
Printing speed:
|
High speed draft
|
300 cps at 10 cpi 360 cps at 12 cpi
|
Draft
|
225 cps at 10 cpi 270 cps at 12 cpi 337 cps at 15 cpi
|
Draft condensed
|
192 cps at 17 cpi 225 cps at 20 cpi
|
LQ
|
75 cps at 10 cpi 90cps at 12 cpi 112 cps at 15 cpi
|
LQ condensed
|
128 cps at 17 cpi 150 cps at 20 cpi
|
Printing direction:
|
Bidirectional logic seeking for text and graphics printing. Unidirectional text or graphics printing can be selected using software commands.
|
Line spacing:
|
1/6-inch or programmable in 1/360-inch increments
|
Printable columns:
|
50 columns (at 10 cpi)
|
Resolution:
|
360 × 180 dpi maximum
|
Feeding method:
|
Friction feed (rear paper entry) Push tractor feed (rear paper entry)
|
Feeder:
|
Rear push tractor Roll paper holder (Optional)
|
Paper feed speed:
|
Continuous
|
53 mm/second at 1/6-inch line spacing (3.6 inches/second)
|
Reliability:
|
Total print volume
|
20 million lines (except print head) MTBF 10,000 POH (25% duty)
|
Print head life
|
200 million strokes per wire
|
Dimensions
|
Printer only: Height Width
Depth
|
153 mm (6.0 inches) 275 mm (10.8 inches) (including the knob) 240 mm (9.4 inches)
|
With optional roll paper holder: Height Width
Depth
|
247 mm (9.7 inches) 275 mm (10.8 inches) (including the knob) 282 mm (11.1 inches)
|
Weight:
|
approx. 3.3 kg (7.3 lb)
|
Ribbon:
|
Black ribbon cartridge (S015624)
|
Ribbon life
(LQ, 10 cpi, 48 dots/ character)
|
Black ribbon
|
3 million characters
|
Acoustic noise:
|
Approx. 54 dB (A) (ISO 7779 pattern)
|
Electronic
Interfaces:
|
One standard bidirectional, 8-bit, parallel interface with IEEE-1284 nibble mode support, and one USB (ver2.0) interface
|
Buffer:
|
64KB
|
Built-in fonts:
|
Bitmap fonts:
EPSON Draft 10, 12, 15 cpi EPSON Roman 10, 12, 15 cpi, proportional EPSON Sans Serif 10, 12, 15 cpi, proportional EPSON Courier 10, 12, 15 cpi EPSON Prestige 10, 12 cpi EPSON Script 10 cpi EPSON OCR-B 10 cpi EPSON Orator 10 cpi EPSON Orator-S 10 cpi EPSON Script C proportional
|
Scalable fonts:
EPSON Roman 10.5, 8-32 pt (every 2 pt) EPSON Sans Serif 10.5, 8-32 pt (every 2 pt) EPSON Roman T 10.5, 8-32 pt (every 2 pt) EPSON Sans Serif H 10.5, 8-32 pt (every 2 pt)
|
Barcode fonts:
EAN-13, EAN-8, Interleaved 2 of 5, UPC-A, UPC-E, Code 39, Code 128, POSTNET
|
Character tables:
|
One italic and 43 graphics character tables:
Italic table, PC437 (US, Standard Europe), PC850 (Multilingual), PC860 (Portuguese), PC861 (Icelandic), PC865 (Nordic), PC863 (French-Canadian), BRASCII, Abicomp, ISO Latin 1, Roman 8, PC858, ISO 8859-15, PC437 Greek, PC852 (East Europe), PC853 (Turkish), PC855 (Cyrillic), PC857 (Turkish), PC866 (Russian), PC869 (Greek), MAZOWIA (Poland), Code MJK (CSFR), ISO 8859-7 (Latin/Greek), ISO Latin 1T (Turkish), Bulgaria (Bulgarian), Estonia (Estonia), PC 774 (LST 1283:1993), ISO 8859-2, PC 866 LAT. (Latvian), PC866UKR (Ukraine), PC771 (Lithuania), PC437 Slovenia, PC MC, PC1250, PC1251, PC 864 (Arabic), PCAPTEC (Arabic), PC708 (Arabic), PC720 (Arabic), PCAR 864 (Arabic)
|
Character sets:
|
14 international character sets and one legal character set:
USA, France, Germany, UK, Denmark I, Sweden, Italy, Spain I, Japan, Norway, Denmark II, Spain II, Latin America, Korea, Legal Letter 7 sets can be selected only with the ESC R command.
|
Electrical
|
220 to 240 V Model
|
Input voltage range
|
AC 198 to 264 V
|
Rated frequency range
|
50 to 60 Hz
|
Input frequency range
|
49.5 to 60.5 Hz
|
Rated current
|
0.3 A (maximum 0.9 A depending on the character type)
|
Power consumption
|
Approx. 20 W (Original test pattern) Approx. 2.3 W in sleep mode* 0 W in power off mode
|
* sleep mode: When 4 minutes 30 seconds pass in the following condition, the printer enters sleep mode. - Not paused and no error - There is no data in input buffer
Environmental
|
Temperature (without condensation)
|
Humidity (without condensation)
|
Operation
|
5 to 35 ˚C (41 to 95 ˚F)
|
10 to 80% RH
|
Storage
|
-30 to 60 ˚C (-22 to 140 ˚F)
|
0 to 85% RH
|
Paper
 Note:
Use recycled paper only under normal temperature and humidity conditions, as follows: Temperature: 15 to 25 ˚C (59 to 77 ˚F) Humidity: 30 to 60 % RH
Do not load paper that has been folded or is damaged, wrinkled, or curled.
|
Continuous paper (standard and multipart): rear entry
Width
|
101.6 to 152.4 mm (4.0 to 6.0 inches)
|
Length (one page)
|
101.6 to 558.8 mm (4.0 to 22.0 inches)
|
Copies
|
1 original + up to 2copies
|
Thickness
|
0.065 to 0.25 mm (0.0025 to 0.0098 inch)
|
Weight (not multipart)
|
52 to 82 g/m² (14 to 22 lb)
|
Weight (one sheet of multipart)
|
40 to 58 g/m² (12 to 15 lb)
|
Binding
|
Spot glued or crimp bound on both sides
|
Roll paper: rear entry with optional roll paper holder
Width
|
101.6 to 127 mm (4.0 to 5.0 inches)
|
Thickness
|
0.065 to 0.09 mm (0.0025 to 0.0035 inch)
|
Weight
|
52 to 82 g/m² (14 to 22 lb)
|
Recommended printable area
 Note:
For best results, print within the recommended printable area. The printer may not print outside this area.
|
Continuous paper:
A
|
The minimum top and bottom margins above and below the perforation are 4.2 mm (0.17 inch) each.
|
B
|
The minimum left and right margins are 13 mm (0.51 inch) each.
The maximum paper width is 152.4 mm (6.0 inches) and the maximum printable width is 127.0 mm (5.0 inches).
|
Roll paper:
A
|
The minimum top margin is 4.2 mm (0.17 inch).
|
B
|
The minimum left margin is 3.0 mm (0.12 inch).
The minimum right margin is 3.0 mm (0.12 inch).
The maximum printable width is 121.0 mm (4.8 inches).
|
|  |