**********************************************************************
    EPSON       EPSONScript Level 2 
		Screen Font Package
		for Windows(R) 3.1 / 95 / Windows NT(TM)
**********************************************************************
This package contains ...
---------------------------
 1)  Disk 1
    Install Program for Screen Fonts and the EPSONScript Printer
    for Windows 3.1

    WPD Files for Windows 3.1
    You can utilize WIN.PS Driver in Windows 3.1 with WPD files
    for EPSON Printers as follows;
    WPD file for EPSON EPL-5600 EPSONScript Printer
    WPD file for EPSON ActionLaser 1600 EPSONScript Printer
    WPD file for EPSON EPL-9000 EPSONScript Printer
    WPD file for EPSON EPL-5500 EPSONScript Printer
    WPD file for EPSON EPL-N1200 EPSONScript Printer
    WPD file for EPSON EPL-N2000 EPSONScript Printer

   Please refer to the EPSONScript user's manual to install WPD.


    Install Program for EPSONScript driver for Windows NT.
    You can install EPSONScript NT by SETUP.EXE.


2)  Disk 2
    SPD Files for Windows 95
    You can utilize WIN.PS Driver in Windows 95 with SPD files
    for EPSON Printers as follows;
    SPD file for EPSON EPL-5600 EPSONScript Printer
    SPD file for EPSON ActionLaser 1600 EPSONScript Printer
    SPD file for EPSON EPL-9000 EPSONScript Printer
    SPD file for EPSON EPL-5500 EPSONScript Printer
    SPD file for EPSON EPL-N1200 EPSONScript Printer
    SPD file for EPSON EPL-N2000 EPSONScript Printer

   Please refer to the EPSONScript user's manual to install SPD.

 3) Disk 3
    Screen Font (compressed)
      1. AvantGarde      4.ZapfDingbats         7. Helvetica
      2. Bookman         5.Palatino             8. Helvetica-Narrow
      3. ZapfChancery    6.NewCenturySchlbk     9. Times

----------------------------------------------------------------------
		 Screen & Printer fonts
----------------------------------------------------------------------
The following table lists the screen fonts and the equivalent printer 
fonts generated by EPSONScript Level 2.
If necessary, refer to the Font Sample sheet printed with your printer's 
hardware panel.  

     ---------------------------:-------------------------------
	  Screen font           :       Printer font  
     ---------------------------:-------------------------------
	  AvantGarde            :       ITC AvantGarde
	  Bookman               :       ITC Bookman
	  ZapfChancery          :       ITC Zapf Chancery
	  ZapfDingbats          :       ITC Zapf Dingbats
	  NewCenturySchlbk      :       Century 702 Schlbook
	  Palatino              :       Zapf Calligraphic 801
	  Helvetica             :       Swiss 721
	  Helvetica-Narrow      :       Swiss 721 Narrow
	  Times                 :       Dutch 801
	  Courier New           :       Courier
	  Symbol                :       Symbol Set


--------------------------------------------------------------------
	Printers & Screen Fonts Installation
--------------------------------------------------------------------
To install the printers and the screen fonts in your Windows, use the 
Install Program.

Follow the instructions shown below:

  1)  Turn on your computer and start Windows.

  2)  From the "File" menu of the Program Manager, choose the "Run" item.

  3)  Insert disk 1 to your drive A (3.5 " disk drive).

  4)  Enter "A:\INSTALL" to the Command Line box and press "Enter".
      (If you insert the disk to a different disk drive, replace A
       with the approprtiate drive letter.)

  5)  The installer starts and prompts you for the backup filename of the
      current WIN.INI.             
      If you want to change the backup filename from WIN.BAK to another
      filename, enter the name before you click "OK".  

  6)  Follow the on-screen instructions.
      When the installation ends, choose "OK" in the "Information" window 
      and reboot Windows.

--------------------------------------------------------------------
   300 dpi printing on EPL-5600, EPL-9000 ,or ActionLaser 1600
--------------------------------------------------------------------
For the EPL-5600, ActionLaser 1600, or EPL-9000, the Windows printer 
driver is optimized for a printer resolution of 600 dpi. If your 
printer is configured for 300 dpi, optimize the driver for 300 dpi 
printing as follows:

  1)  Double-click the "Printers" icon in the Control Panel window.

  2)  Select "EPSON EPL-5600 EpsonScript...", "EPSON AL-1600 EpsonScript
      ...", or "EPSON EPL-9000 EpsonScript..." in the "Installed 
      Printers" list.

  3)  Choose the "Setup..." button, then choose the "Advanced..." button.

  4)  Change the "Resolution (DPI)" setting to 300 in the "Graphics" 
      category.

  5)  Change the "Halftone Frequency" to 60 by typing "60" instead of 
      85.

  6)  Make sure the "Halftone Angle" is 45.

  7)  Choose "OK" to exit each dialog and return to the Main window.

Note: Some application software may override the printer's defaults with 
      user-selectable values from its menus. In this case, it is 
      recommended that you try the following settings, depending upon 
      the resolution of printer's hardware panel:

	Resolution              600 dpi         300 dpi
	Halftone Frecuency      85              60
	Halftone Angle          45              45

--------------------------------------------------------------------
   Possible Problems
--------------------------------------------------------------------
 1) Installing  Screen Fonts 
 When the same screen fonts have been installed on Windows 3.1 system, 
Installation of screen fonts may not complete correctly. 
 In that case, delete 'tib_.ttf' from Windows' system directory before 
installation.

 2) EPSONScript NT Driver

        When paper feed sequence sets 'First -> Manual feed     Next -> Auto, 
        Standard Tray or Lower Cassette 1', Printer pull paper as Manual feeding.
        To recover this situation, select pull paper from AUTO instead.

       Inconsistent setting of Printing Resolution between setting of Print Manager
       and the application may cause incorrect printing.
       For example, resolution set 300dpi from Print Manager and resolution set 
       600dpi from printer property of applications.
       In this case, the setting in Print Manager set 'Printer's Default', and set 
       the resolution which you want.

       EPSONScript NT driver does not work on Windows NT Workstation Ver. 3.5. 
 
       Please do not use characters ( ,) or - for Printer's Name. Some applications 
       may not work correctly with the printer containing such character.

 3) Windows 95 Mini driver
 The default paper size depends on the application software even if you install 
EPL-N1200(A4) or EPL-N1200(LT) or EPL-N2000(A4) or EPL-N2000(LT).


Copyright (c) Seiko EPSON Corporation 1996.
Nagano Japan